Inhoudsopgave
Advertenties
ENGLISH
Operating instructions
References marked on tester or in in-
struction manual:
1. Introduction / Product Package
The contactless voltage tester VT CL
is developed for voltage testing at in-
sulated wires and cables. No direct
contact to the device under test (DUT)
is required.
The contactless tester VT CL is char-
acterized by the following features:
• Designed to meet international safety
standards EN61010-1
• Measurement Category (CAT) IV
1000V
• Contactless voltage testing between
90V and 1000V
• Check for cable breaks
• Phase detection on sockets
• Voltage test through red LED and
buzzer
• Self test
8
Warning of a potential danger,
comply with instruction manual.
Reference. Please pay utmost
attention.
Caution! Dangerous voltage.
Danger of electrical shock.
Continuous double or rein-
forced insulation complies with
category II DIN EN 61140.
Conformity symbol, the instru-
ment complies with the valid
directives.
Tester complies with the stand-
ard (2012/19/EU) WEEE
The instruction manual contains
information
necessary for safe operation
and maintenance of the tester.
Prior to using the tester (com-
missioning/ assembly) the user
is kindly requested to thoroughly
read the instruction manual and
comply with it in all sections.
Failure to read the tester man-
ual or to comply with the warn-
ings and references contained
herein can result in serious bod-
ily injury or tester damage. The
respective accident prevention
regulations established by the
professional associations are to
be strictly enforced at all times.
and
references,
Advertenties
Inhoudsopgave
