Inhoudsopgave
Advertenties
2. Installation
shown.
7. Turn the thumb-turn cover clockwise until it stops.
Cylinder beeps four times.
9
8. Pull the recessed grip outwards until it is flush with the
thumb-turn cover.
9. Place the battery/installation key on the electronic side
thumb-turn so that the two noses engage in the open-
ings of the locking disc (if necessary, turn the thumb-turn
until the noses engage).
10. Hold the thumb-turn firmly and turn the battery/installa-
tion key about 30° counterclockwise.
9
The locking disc/thumb-turn cracks.
LockNode is mounted.
9
If the cylinder does not beep, check the battery condition.
You can recognize a cylinder with LockNode by the black
19 / 80 | EN
Advertenties
Inhoudsopgave
