Advertenties
The instrument has two operating mode keys:
Laser beam switch key to project Vertical and Horizontal line by step.
Detector key to activate DETECTOR mode, in order to use with a detector in brighter condition or further di-
stance. Power indicator light to show the laser is on. Flashing alarm for low voltage: Replace batteries or charge
Li-ion battery.
Automatic Self-Leveling
1. Switch to ON to work. The pendulum automatically aligns a position within the range of self-leveling
range ±4°.
2. Laser beam starts to blink and an alarm sounds when the instrument is out of the self-alignment range. In
this case, place the instrument on flat surface, adjust tripod or base legs until blinking and sound stops.
Pendulum Lock
3. Switch to LOCK mode to allow constructing inclined planes.
4. Two laser lines are not always constructed as orthogonal in the mode of crossing lines.
5. Self-leveling is disabled when laser level is under LOCK mode.
Maintenance and service
6. Do not attempt to open the instrument. To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment must be performed by authorised service centres. The warranty is void if the instrument is
opened. To locate your nearest service centre, contact your dealer.
7. Do not drop, knock, or shake the instrument as this may affect its precision.
8. Remove the batteries when the instrument is not in use.
9. Keep the instrument clean at all times. Use a soft cloth with mild soap for body, and lens tissue for glass
windows.
10. Do not expose the instrument to sunshine for long periods.
11. 4.2 V/1.5 A power adaptor work with 3.7 V Li-ion battery. Power adaptors can connect to instruments direct-
ly to work as a power supply.
12. Never use the DC charger to charge alkaline batteries. Remove alkaline batteries when using the DC charger
to supply power.
Specifications
Wavelength
Indoor working distance
Laser Class
Ingress Protection Rating
Working temperature
Auto level range
Accuracy
Power Supply
Battery Hours
Screw adaptor
Transport Lock
Individually shiftable function
Out-of-level indication
* Minimum hour is with all available lines on.
6
STROXX 3-D: 660 nm/ STROXX 3-DG: 532 nm
STROXX 3-D: 90 ft / STROXX 3-DG: 130 ft
Class II M < 1.5 mW
IP54
-10 °C to +40°C
±4˚
±1/8" at range of 60 ft
4 x AA batteries / BALI-3.7(B) Li-ion battery / DC
charger
7-10 hours*
5/8 " and l/4"
Yes
Yes
Optical signal/Audible
en
To charge Li-ion battery
Power supply:
Li-ion battery, or
4*AA batteries with cell holder, or
240V AC/DC charger
When the laser level is not
in use:
Connect the mini-USB
cable from the DC charger to the
Li-ion battery. Charge until power
indicator light changes to green
to indicate battery is charged.
When laser level is in use:
Insert Li-ion battery into the laser
level. Connect the DC cable of the
AC adaptor to the power socket
located on the right of the laser
level to charge the Li-ion battery
and operate laser level simulta-
neously.
Operation
Laser line indication
360 degrees x 3 laser lines
(12lines)
Switch ON/OFF
1. Insert batteries according to the "+,-"sign in the battery socket.
2. Set up the instrument on the floor, with the rotating base, or a wall mount or the tripod.
3. When using the tripod, support the centring nut of the instrument with one hand and tighten the centring
screw.
4. OFF/LOCK/ON button is located on the left side of instrument body .
5. Switch right to ON to start self-levelling operation and LOCK for incline function.
www.stroxx.eu
When the laser level is not in use:
When the laser level is in use:
Connect the mini-USB cable from
Insert Li-ion battery into the laser
the DC charger to the Li-ion bat-
level. Connect the DC cable of the
tery. Charge until power indicator
AC adaptor to the power socket
light changes to green to full
located on the right of the laser
level to charge the Li-ion battery
and operate laser level simulta-
neously.
7
Advertenties
