Advertenties
4.2 Initial use
CAUTION
Ensure that the heat pad will not bunch up or become folded during use.
• To operate the heat pad connect the control to the heat pad by
plugging in the connector.
• Then plug in the power plug into the mains outlet.
4.3 Additional information for HK 58 Cosy
The exclusive shape of this heat pad was developed specifically for use on
the back and neck. Position the heat pad on the back so that the hook and
cerrarlos. Para separar los extremos conectores, apriete a la vez
loop fastener on the neck part is in line with your neck. Then close the hook
and loop fastener. Adjust the length of the abdominal belt so that you are
comfortable and fasten the buckle by fitting one end into the other.
To undo the buckle, push both sides of the clasp together as shown in the
image.
4.4 Switching on
Push the sliding switch (3) on the right side of the control to the setting "I" (ON) – see image of control. When
the switch is on, the temperature settings display is illuminated.
4.5 Setting the temperature
To increase the temperature, press the
Level 1: minimum heat
Level 2-5: individual heat setting
Level 6: maximum heat
NOTE:
The fastest way to warm up the heat pad is to initially set the highest temperature setting.
NOTE:
These heat pads have a fast heating function, which allows the pad to warm up faster in the first
10 minutes.
WARNING
If the heat pad is being used over several hours, we recommend that you
set the lowest temperature setting on the control to avoid overheating
the heated body part, which may lead to burns to the skin.
4.6 Automatic switch-off
This heat pad is equipped with an automatic switch-off function. This turns off the heat supply
approx. 90 minutes after the initial use of the heat pad. A part of the displayed temperature
settings on the control then begins to flash. So that the heat pad can be switched back on, the
side sliding switch (3) must first be set to setting "0" (OFF). After about 5 seconds it is possible
to switch it on again.
4.7 Switching off
To switch the heat pad off, set the sliding switch (3) on the side of the control to setting "0" (OFF). The tem-
perature settings display is no longer illuminated.
button (4). To reduce the temperature, press the
14
button (4).
90
min
STOP
Advertenties
Hoofdstukken
