Installation Variants - Oase Aquarius Eco Expert 22000 Handleiding
Verberg thumbnails
Zie ook voor Aquarius Eco Expert 22000:
- Gebruiksaanwijzing (19 pagina's) ,
- Gebruiksaanwijzing (356 pagina's) ,
- Gebruiksaanwijzing (165 pagina's)
Inhoudsopgave
Advertenties
1
Inlet (suction side)
• With filter cage (3) for submerged installation.
• With hose sleeve for connecting a hose for dry installation.
2
Outlet (pressure side)
• Connection of the return line into the pond (e.g. via a water course).
3
Filter cage
4
Foot
• With installation holes for firm installation on ground if required.
5
Power cable
• Pump power supply
6
Switch for switching on/off the dynamic function
• Numerous values for flow rates have been pre-programmed in the pump control system to cre-
ate a dynamic fountain with changing heights and diameters. If the dynamic function is acti-
vated, the pump is continuously controlled with these values.
7
Control system connection
• The control system makes it possible to regulate the pump power.
Hose sleeve ∅ 50 mm
• Without the control system, the pump runs permanently at full power.
Hose sleeve ∅ 38 mm
8
9
• Alternative for outlet Aquarius Eco Expert 22000 and 28000.
10
Hose clips for fastening hoses on the hose sleeves.
Installation variants
A
• Variant (a): Submerged pump installation
– The pump is positioned in the pond or basin.
– Water flow via the filter cage.
• Variant (b): Dry pump installation
– The pump is installed without the filter cage outside of the pond or basin but lower than the
water level.
– Water flow via a satellite filter or skimmer.
EN
13
Advertenties
Hoofdstukken
Inhoudsopgave
