Inhoudsopgave
Advertenties
PREPARATION
1.
Sit the motor unit on a dry, firm, level surface.
2.
Route the cable so it doesn't overhang, and won't trip or catch.
3.
Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
4.
Remove the lid.
5.
Put the ingredients into the jug – don't fill past the max mark.
6.
Put the lid on the blending jug.
Check that the speed control is set to 0.
7.
8.
Put the plug into the power socket (switch it on, if it's switchable).
9.
Turn the speed control to the speed you want (1 = low, 2 = high).
10. Turn the speed control back to 0 to turn the motor off.
11. Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In this
direction, the knob is spring-loaded. When you let go, it'll return to 0.
USING THE BLENDER
1.
Lower the blender jug on to the motor unit, then turn the jug clockwise, to lock it in place.
2.
Remove the lid.
3.
Put the ingredients into the blender jug.
4.
Replace the lid.
5.
Align the pips on the cap with the slots in the hole in the lid, fit the cap, and turn it clockwise to lock it.
6.
Don't run the appliance without fitting the cap.
7.
To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole, then replace the cap.
8.
Once finished, switch the appliance off (0) and unplug it.
9.
Turn the blender jug anti-clockwise, and lift it off the motor unit.
CRUSHED ICE
1.
For best results, full the jug with between 150ml and 500ml of ice cubes.
2.
Put the lid on the blender, then:
Turn the speed control to Y for a second or two, then release it.
3.
4.
Check the results, and adjust.
USING THE PROCESSOR
•
If you're using just liquids, don't fill the jug past the MAXaa mark.
If you're using solids, or a mixture of liquids and solids, don't fill the jug past the MAX mark.
•
1.
Switch the appliance off (0) and unplug it.
2.
Fit the spindle to the top of the motor unit.
3.
Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
4.
Choose the attachment you need.
5.
Hold the lid with the tube slightly behind the jug handle, set it on the jug, then turn it clockwise, to
lock the tab into the top of the handle.
6.
Once finished, switch the appliance off (0) and unplug it.
7.
Turn the jug anti-clockwise, and lift it off the motor unit.
USING THE CHOPPER/MIXER/CREAMER ATTACHMENT
Use the chopper for pulverizing ingredients.
Use the mixer to mix ingredients together.
Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar together.
1.
Fit the desired attachment onto the drive shaft and slide it to the bottom.
4
Advertenties
Inhoudsopgave
