Download Inhoudsopgave Inhoud Print deze pagina

Transportation And Storage - Ryobi RY150PWA Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Do not use the product if the switch does not
turn it on and off. Any product that cannot
be controlled with a switch is dangerous
and must be repaired.
Keep a minimum distance of 30 cm when
cleaning vehicles. The high pressure jet
may damage or burst vehicle tires and/or
tire valves.
Use a garden hose with a maximum length
of 15 m and minimum diameter of 18 mm
(3/4 in.).
Before each use, ensure that the accessory
is securely attached to the trigger gun.
OVERLOAD PROTECTION
The product has an overload protection device
that is activated when overheating or when a
current spike occurs, automatically shutting
down the power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes, and
reconnect the product to the power supply.

TRANSPORTATION AND STORAGE

CAUTION! Mind the weight of the product
when selecting the storage location and during
transportation to prevent accidents or injuries.
Stop the product, disconnect from the power
supply, and allow the product to cool down.
Disconnect the product from the water
supply before storing or transporting. Never
place the product in any position other than
upright.
Clean all foreign materials from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
the product away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store the product outdoors.
Remove water from all hoses and the pump,
and empty the detergent tank before storing
the product.
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
Store the product indoors only. Storing the
product in an area with temperature below
0 °C will damage the product.
MAINTENANCE
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
Servicing
requires
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
Turn off the product, disconnect from the
power supply and water supply, and allow
the product to cool down:
before servicing
before clearing a blockage
before checking, cleaning, or working on
the product
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
Regularly inspect and maintain the high
pressure cleaner for safe operation. RYOBI
recommends inspecting the product every
6 months.
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
KNOW YOUR PRODUCT
See page 143.
1.
Turbo lance
Lance extension
2.
Vario lance
3.
Surface cleaner
4.
5.
Rotary brush
Nozzle cleaning tool
6.
O-rings
7.
8.
Surface cleaner connector
Water inlet filter
9.
10. Reel handle
11. Power cord holder
12. Water inlet port
13. Detergent tank cap
14. Detergent tank
15. Power cord
16. On/Off switch
17. Wheel
18. Operator's manual
19. Garden hose
manufacturer's
accessories,
and
extreme
care
and
5
5
Original Instructions
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Advertenties

Inhoudsopgave
loading

Inhoudsopgave