Inhoudsopgave
Advertenties
Электроплита индукционная PROFI COOK PC-EKI 1016
Купить в интернет-магазине http://clatronic-shop.com.ua
• Put a suitable pot on the cooking zone.
• Press the ON/STANDBY button (6), to start
cooking. The indicator lamp on the ON/STAND-
BY button (6) will be on continuously.
NOTE:
Press the FUNCTION button within 1 minute;
otherwise the cooking plate will return to
standby mode.
Select Temperature or Power As Function
• Press the FUNCTION (2) button to select tem-
perature or power control. The indicator lamps
TEMP. and/or POWER show the options.
Select Temperature or Power For The Cooking
Plate
• Repeatedly press the " " or " " (3 or 4) button
to select one of the six power or temperature
settings.
NOTE:
• The cooking plate always starts on temper-
ature 180°C or power level 4 respectively.
• The indicator lamps show selected level /
temperature.
• The cooking plate automatically turns
off after 120 minutes if no further input is
detected.
• On power level 1 food can be kept warm
for 8 hours. Then the cooking plate turns
off automatically.
BOOST Button
The BOOST function can be separately activated
to quickly heat up on the highest power or tem-
perature setting. The BOOST button (1) indicator
lamp lights up.
The function can be deactivated by decreasing
power or temperature with the " " button or by
pressing the BOOST button again.
In this case the temperature is reset to 180°C.
All manuals and user guides at all-guides.com
Enter Off Time
The TIMER button is used to limit the cooking
time.
• Switch the appliance on and select the desired
• Press the TIMER (5) button. The TIMER (5)
• Set the off time between 1 minute and 3:00
Delete the time
• If you would like to delete the preset times,
Automatic shut-off
The hot plate turns off automatically after 120
minutes, if no input was given over the opera-
tor control panel during this time. This switching
serves as security for you.
On power level 1 food can be kept warm for 8
hours. Then the cooking plate turns off
automatically.
setting.
indicator lamp lights up.
hours with the " / " buttons.
NOTE:
• Briefly press the " " or " " button to set the
time in 1-minute steps.
• Press and hold the " " or " " button to set
the time in 10-minute steps.
• Pressing the " " button sets the timer to
3:00 hours. In this way you can set the
time in reverse.
• The time value first flashes a few seconds
after setting, then lights up continuously.
• The cooking plate turns off automatically
after the preset time and a beep tone
sounds.
• Once the time is set it cannot be changed.
In this case clear the timer and programme
again.
press the TIMER (5) button, so that the control
lamp goes off.
NOTE:
43
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
