Inhoudsopgave
Advertenties
Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions. Read it
carefully before using the device for the first time and keep it in a
safe place for future reference. This machine should only be used
for charging operations comprised within the limits indicated on
the machine and in the instruction manual. The operator must
respect the safety precautions. In case of inedaquate or unsafe
use, the manufacturer cannot be held liable.
This unit can be used by children aged of at least 8 years and by
people with reduced physical, sensory or mental capabilities or
lack of experience or knowledge, if they are properly monitored
or if instructions for using the equipment safely was given to them
and if they have been made aware of the risks. Children must no
play with the product. Cleaning and maintenance should not be
performed by unsupervised children.
Do not use to charge small batteries or non rechargeable batteries.
Do not use the device if the charging cable appears to be
damaged or assembled incorrectly in order to avoid any risk of
short circuiting the battery.
The operating mode of the automatic charger and the restrictions
applicable to its use are explained below in this manual.
Fire and explosion risks!
A charging battery can emit explosive gases.
• During the charge, the battery must be placed in a well ventilated
area.
• Avoid flames and sparks. Do not smoke.
Connection / disconnection:
• Ensure that the charger's power supply is disconnected before
plugging or unplugging the connections on the battery.
• Always ensure the Red clamp is connected to the «+» battery
terminal first. If it is necessary to connect the black clamp to the
vehicle chassis, make sure it is a safe distance from the battery
and the fuel/exhaust pipe. The charger must be connected to
the mains.
• After charging, disconnect the charger from the mains, then
disconnect the clamp from the car body and then disconnect
the clamp from the battery, in the indicated order.
Connection:
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
ARTIC 8000
EN
5
Advertenties
Inhoudsopgave
