Inhoudsopgave
Advertenties
Inflatable Christmas Decoration
INTRODUCTION
To get the most out of your new Inflatable Christmas Decoration, please read this manual
before use. Please also save the manual in case you need to refer to it at a later date.
TECHNICAL DATA
8 LED - 1000mA
Size: 2.4m
Material: Nylon 190T 86g/sqm
Fan: 12V 9,6W plug 0.8A
Adaptor: 12V 12W
Incl. 6 Ground spears + 3 strings
PARTS
Check to ensure all parts listed are in-
cluded in the product packaging.
•
Inflatable Figure
•
Approved Adaptor
•
Ground spears
•
Strings
•
Instruction
SET UP AND USE
1.
Remove contents from packaging.
2.
Plug the adaptor into the connec-
tion at the base of inflatable. When
using indoors, plug the adaptor
plug into a standard wall outlet.
When using outdoors, a GFCI out-
let must be used.
3.
Be sure the zipper is closed in
order for figure to fully inflate.
4.
For quicker inflation, lift the figure
up when the fan is blowing.
5.
To secure the Inflatable Figure
outdoors, insert a metal stake at
a slight angel into the ground
through each of the holes in the
lower tabs of the inflatable figure.
6.
Secure the upper body using the
strings provided to side tabs and
attach to additional ground stakes.
7.
To deflate, unplug fan. For faster
deflation, open zipper after un-
plugging adaptor.
8.
To avoid damage please do not ex-
pose the figure to extreme weather
conditions like heavy rain, snow,
stormy weather etc.
CARE AND MAINTENANCE
Periodically check to ensure there are
no holes or tears in the inflatable fig-
ure. If you find any tears in the fabric,
you can repair them with needle and
regular thread. No special thread is
necessary.
Always keep the air vent in the motor
base unobstructed and free from dirt
and/or debris.
Periodically unplug the product from
the electrical outlet and allow the adap-
tor and fan to cool to avoid overheating
and/or product damage.
Neatly fold and store the product in
a cool, dry location that is away from
sunlight or heat sources.
10
Advertenties
Inhoudsopgave
