Inhoudsopgave
Advertenties
1
Installation
1. Unscrew the cover elements.
2. Mark the holes of the installation brackets
on the wall.
3. Drill the holes and fit the plugs.
2
Power supply
Shut down the automatic circuit breaker. Make
sure that is shut off in all poles.
3
Electrical connection
An external switch e.g. light switch, thermos-
tat, etc. must be used to control the device, it
must be located between the L and the T wire.
4
Cable port
Remove the cap from the cable port.
5
Cable routing
1. Slide in the cable through the cable port.
2. Place the cable through the cable route.
16
6
Wiring
Install the device with the screws and connect
the cable to the terminal as shown.
7
Cover
Attach the cover elements to the device as
shown. Fix them with the small screws accor-
dingly.
8
Set Speed & Timer
Adjust the appliance according to the instruc-
tions on the next page.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
