Removing/installing the blade
CAUTION Sharp parts can cause injury!
The blade of the manual all-purpose slicer is very sharp!
Handle it with care.
Remove the blade locking screw
1
counter-clockwise.
Use a suitable screwdriver or a coin to do this.
INFO:
The direction of opening is marked on the locking screw
with an arrow (
AUF OPEN OUVRIR
Remove the blade
carefully.
2
F
•
It can be reinstalled using the same steps in reverse
order.
•
Lubricate the teeth of the blade and the crank drive with
a little cooking oil or fat.
When tting the plastic ring of the blade
IMPORTANT:
holder, line up the grooves in the ring with the ribs on
the housing.
When re-installing the blade, it is impor-
IMPORTANT:
tant to ensure that the teeth of the blade t in with the
teeth of the crank mechanism.
•
Do not overtighten the blade locking screw!
Cutting food
CAUTION Sharp parts can cause injury!
The blade of the manual all-purpose slicer is very sharp!
Handle it with care.
Pay particular attention to the position of your ngers
when cutting food!
•
Before using for the rst time, thoroughly clean all parts
of the appliance (see section
•
Set the desired slice thickness using the adjusting knob
.
E
INFO:
+
Thicker
Thinner
–
•
Using your right hand, turn the crank handle clockwise.
•
With your left hand, place the food to be sliced against
the thickness guide and with light pressure push it slow-
ly against the turning blade.
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
by screwing it out
G
).
).
Cleaning
Cleaning
CAUTION Sharp parts can cause injury!
The blade of the manual all-purpose slicer is very sharp!
Handle it with care.
NOTE
Dishwasher can cause damage!
The appliance is not dishwasher-safe. Only clean the appli-
ance using lukewarm water and washing-up liquid.
•
Never immerse the appliance in water and never hold it
under running water.
•
Only clean the appliance using a damp cloth.
•
Clean the blade thoroughly at regular intervals.
•
To ensure that the suction feet have good adhesion,
clean them regularly.
Storage
Store the appliance in its original packaging, in a dry, dust-
free and cool place that is out of reach of children.
5