Inhoudsopgave
Advertenties
2.4 Adjusting input sensitivity
The input sensitivity can be adjusted in 5 levels
according to environmental requirements.
On the powered-up device, press and hold the
MODE-button for 3 seconds.
The symbol »CH« in the display will blink.
Press the MODE button again. The »C1« symbol
in the display blinks.
By using the »
« and »
« buttons, select be-
tween C1 (low sensitivity) and C5 (high sensitivity).
Please note: The default setting is C3.
2.5 Transmission power
The setting of the transmission power affects the
radio range.
To do this, press and hold the MODE button for
more than 3 seconds while the unit is switched
on. The »CH« symbol on the display starts to
flash. Now press the MODE button twice. Now
use the »
« and »
« buttons to select the setting
»P1« for the lowest transmission power and »P7«
for the highest transmission power.
After selecting the transmission power, wait 3 se-
conds to accept the selection.
English 16
Advertenties
Inhoudsopgave
