Inhoudsopgave
Advertenties
EN
Replacing the filter
1. Remove the mist nozzle (6) from the water tank
(3).
2. Lift the ceramic ball filter (7) off the filter slot.
3. Place the new ceramic ball filter onto the filter
slot until it is firmly secured into place.
4. Reassemble the humidifier.
NOTE: Replace the filter every 500 hours working
time under normal circumstances.
Keep the descaling agent away from children.
Keep the descaling agent out of your mouth
and eyes. If you accidently touch the
descaling agent, wash with tap water
immediately.
Do not scratch the transducer with hard
objects.
Cleaning the humidifier housing
Put the soft cloth in warm water below 40°C, then
remove surface stains using the soft cloth. Rinse
the mist outlet (8) with water directly; do not use
alcohol, acetone and other organic solvents to
clean the unit.
TROUBLESHOOTING
If your humidifier is not working properly, check the
following before calling for service.
Problem
Possible cause Treatment
The appliance
The power cord
will not turn
or plug is loose or
on.
not connected.
8
The appliance
is not working.
The mist has
an odor.
ENVIRONMENT
Check the power
cord and plug. Make
Only for EC countries
sure they are firmly
Do not dispose of power tools into domestic waste.
connected to the base
According to the European Guideline 2012/19/EU
and mains socket,
for Waste Electrical and Electronic Equipment and its
respectively.
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
- Refill the water tank.
- Place the appliance
on a stable, even
surface.
- Touch the mist button
(17) to increase the
- There is not
mist level.
enough water in
- Clean the mist nozzle
the water tank.
and mist tube as well
- The appliance is
as the water tank (see
tilting.
Cleaning and care).
- The appliance is
- Check the float valve
not producing
and/or oscillator in
enough mist.
the base is working
There is a
and not damaged.
buildup of dust
or scale.
Clean if necessary
(see Cleaning and
care). If damaged,
take the appliance
to a qualified service
provider for repair.
- Clean the water tank
and its parts (see
The appliance
Cleaning and care).
may be dirty.
- Replace the old water
in the tank with fresh
distilled water.
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
WWW.VONROC.COM
Advertenties
Inhoudsopgave
