Inhoudsopgave
Advertenties
WARNING: The device must be unfolded and on its stand for charging to avoid dam-
aging the charging plug.
1. Remove the charging port cover and ensure there is no water or any other liquid
inside the charging connector, and that it is free of any objects that could cause
a short circuit or prevent the plug from being properly and safely plugged in. Then
connect the end of the charging cable to the charging port (7). BEFORE connecting
the other end to the power supply. BEFORE connecting the plug to the mains, ensure
that the charger is first connected to the device correctly by referring to the codes
on the device.
2. The charger indicator will light up red when charging.
3. The charger indicator will light up green once charging is complete.
4. When charging is complete, disconnect the mains plug from the outlet first, then
unplug the charger from the device. Finally, close the cover to prevent liquids or other
objects from entering the charging connector.
3.5. HOW TO USE THE DEVICE (read before first use)
For your safety, we recommend that you use this equipment in comfortable
conditions with protective equipment such as a helmet, gloves and appropriate
joint protection (knee and elbow pads). For your own safety and that of others,
you should drive and use the machine wearing closed shoes, preferably flat
ones to ensure good grip and stability.
HELMET USE
We strongly advise you to wear protective gear, at least a helmet, before getting on the
device, which must comply with the regulations on personal protective equipment
and which must be fastened.
WARNING! The device must not be used outside the areas permitted by regulations.
Helmet
Elbow pads
Wrist guard
Knee pad
17
EN
Advertenties
Hoofdstukken
Inhoudsopgave
