Inhoudsopgave
Advertenties
Power on the System / Schalten Sie das System ein / Mise sous tension du système
/ Encienda el sistema / Ligue o sistema / Het systeem inschakelen / Accensione del
sistema / Włączanie systemu / Zapnutí systému / Slå på systemet / Pornire sistem
/ Включване на системата / Tænd for systemet / Ρεύμα στο σύστημα / Süsteemi
sisselülitamine / Kytke järjestelmän virta päälle / Napajanje sustava / Rendszer áram
alá helyezése / Įjungti sistemą / Ieslēdziet sistēmu / Zapnite system / Vklopite sistem /
Vklopite sistem / Güç açma / Ligar o Sistema / قم بتشغيل النظام
Step 1:
Turn on the AC breaker between the inverter and the EPS loads.
Step 2: Turn on the DC switch between the PV string and the inverter. (if any)
Step 3:
Turn on the DC switch between the battery and the inverter.
Step 4: Turn on the DC switch at the left side of the inverter.
Step 5:
If the battery is connected, but is not connected. Press and hold the battery
button until the screen is on. If PV is connected, skip this step.
71
Advertenties
Inhoudsopgave
