Inhoudsopgave
Advertenties
the 4th LED will still be the original colour of the battery status
indicator.
WARNING! Do not connect any device to be charged to
power bank as long as the power bank is charging. Remove the
charging cable from the power bank when it is fully charged.
Checking the battery status
You can check the battery status via the LED indicator
power bank
3
Briefly press the ON / OFF button
7
shows the approximate charge status of the internal
battery capacity level for approx. 30 seconds.
Charging mobile devices with the
power bank
You can charge up to two devices at the same time using the
power bank
3
sum of the output current may not exceed 3 A.
Connect the USB Type A plug of USB cable
original charging cable of the device to be charged to the
USB type A output
Then connect the USB Type C plug of the USB cable
the USB Type C input port of the device to be charged. The
charging process will start automatically.
NOTE: You could also charge your conventional USB
devices from the USB Type A output port
using the included USB cable
USB cable (not included).
at anytime.
. If all outputs are used at the same time, the
which supports QuickCharge 3.0.
2
6
. The LED indicator
of the power bank
2
or a USB Type A to micro
4
7
of the
or the
4
4
to
GB/IE 33
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
