Inhoudsopgave
Advertenties
1. Safety Instruction
■ Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they
also receive this instruction booklet.
■ Unpack and check carefully there is no transportation damage before using the unit.
■ Before operating, ensure that the voltage and frequency of power supply match the power requirements of
the unit.
■ It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
■ The unit is for indoor use only and use only in a dry location.
■ The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be
sure that no ventilation slots are blocked.
■ Disconnect mains power before fuse replacement or servicing.
■ Replace fuse only with the same type.
■ Make sure there are not flammable materials close to the unit while operating as it is fire hazard.
■ Use safety cable when fixes this unit.
■ In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repair carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center and always use the same type spare parts.
■ Do not touch any wire during operation as high voltage might be causing electric shock.
2. Technical Specification
LED
: 5mm×60LEDs for RGBAW 5 color
Function
: Sound and Auto mode
Voltage
: Adaptor 240V AC 60-50Hz / 12V DC 1A
Power
: 20Watt
Dimension
: 205 x 140 x 95mm
Weight
: 0.55kg
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit's weight. Also always use a safety cable that can hold 12 times
of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people
and has no one pass by or under it.
4. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on
the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Please read the instruction carefully which including important
information about the installation, operation and maintenance.
Advertenties
Inhoudsopgave
