Download Inhoudsopgave Inhoud Print deze pagina

Mounting The Display; Connecting The Display - Dometic NDS DTB01 Montagehandleiding En Gebruiksaanwijzing

Elektronisch beeldscherm
Inhoudsopgave

Advertenties

Installation on boats or yachts
Stationary or mobile use
Indoor use
The display not suitable for:
Mains operation
Outdoor use
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6
Installation

Mounting the display

NOTICE! Damage hazard
Using the wrong cables can lead to excessive overheating of the cables, high voltage drops
and possible failures. Only use cables with a suitable cross-section and that can withstand
the current.
To avoid radio interference, do not install the display near metal parts or in an area with high
levels of electrical automation and high-frequency devices.
Ensure that the screws are horizontal to each other.
Ensure that the electronics board is mounted the right way round. The button must be on
the bottom of the electronics board.
Install the display as shown.
fig. 
on page 1

Connecting the display

Connect the display as shown.
fig. 
on page 2
7

Advertenties

Inhoudsopgave
loading

Inhoudsopgave