Inhoudsopgave
Advertenties
2. Press the power on/off button for about 2 seconds to power on the monitor. The power indicator
should light up and the picture appear.
3. For systems settings press the menu button to open the main menu. The following screen should
appear. Use the navigate, OK and menu buttons to navigate through the menu.
System
1. Press OK to enter the system settings. The system offers the following options:
Date / Time
Language
Record Mode
Format SD/USB
Storage for Recording
Display Items
TV System
System Information
Scan Mode Period
Mute
Load Default
Record Date/Time
Brightness
Volume
2. Select date/time with the navigate button and press OK to enter the date/time setting.
• Press the left or right arrow button to select.
• Press the up or down arrow button to adjust.
• Press the OK button to confirm.
• Press the MENU button to exit.
3. Select language with the navigate button and press OK to enter the language setting.
• Press the down or up arrow button to select language.
• Press the OK button to confirm and exit.
4. Select record mode with the navigate button and press OK to enter the record mode setting.
• Press the up or down arrow button to select "Normal" or "Overwrite".
• Press the OK button to confirm and exit.
Remarks:
Normal: When the SD card or the mobile hard disk is full, the system stops recording automatically.
Overwrite: When the SD card or the mobile hard disk is full, the system automatically deletes the first
video and reserves sufficient storage space to guarantee latest recording.
5. Select format SD/USB with the navigate button and press OK to enter the format SD/USB setting.
Set the time and date.
Set the language.
Set to stop recording or overwrite the first video record when the storage
medium is full.
Set to format the storage medium.
Set the storage medium.
Set to display RSSI, Time, SD/USB status and camera on the screen and
the recorded video.
Select a TV system (PAL for Europe).
Shows the system information.
Set the cyclic display interval of the monitoring picture on the camera.
Turns on/off the speaker on the monitor.
Reset the factory default settings.
Set to display the current recording time and date on the recorded video.
Adjust brightness of the picture.
Adjust the volume.
5
Advertenties
Inhoudsopgave
