Inhoudsopgave
Advertenties
Product Safety Information
Intended Use:
These Air Orbital Sanders are designed for smoothing and sanding paint, fiberglass, wood and body
filler.
For additional information refer to Safety Information Manual Form 04580387.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Free
Speed
Model
rpm
4151
12,000
4151-2
12,000
4151-5
12,000
4152
12,000
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16577215 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1.
Regulator
2.
Emergency shut-off valve
3.
Hose diameter
4.
Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Form 04576005-Edition 10
Pad Diameter
inch
mm
6
152
6
152
5
127
6
152
5.
6.
7.
Sound Level dB (A)
(ISO15744)
Pressure (L
)
Power (L
p
"K
"=3dB(A)
"K
pA
wA
81.6
81.6
81.6
81.6
Coupling
Safety Air Fuse
Grease - Remove sanding pad and inject
Vibration Level
(ISO8662)
)
w
m/s²
"=3dB(A)
---
4.7
---
4.7
---
4.7
---
4.8
3
Advertenties
Inhoudsopgave
