Inhoudsopgave
Advertenties
English
Montage
Application
The colour Touchscreen Monitor
MOCT 711-... with backlit 10 cm
(4") colour LCD and touchpanel is
designed as a surface-mounted wall
unit. It can also be mounted in com-
bination with an intercom system, or
in a flush or table-top mounted ver-
sion. The MOCT 711-... features an
integrated video memory which
automatically stores 32 colour video
images with date and time.
The touchscreen can be configured
using a laptop to form a switchbo-
ard for the In-Home bus and/or the
EIB system.
This control centre is then used to
transmit control commands, start
interrogation routines and receive
messages.
The Touchscreen Monitor 711-...
is not suitable for continuous
operation!
i
Surface mounting
instructions
A separate flush-mounted junction
box should be installed under each
monitor to provide supply line clea-
rance. The most favourable viewing
angle is achieved by mounting the
touchpanel at eye level. The lighting
conditions should also be taken into
account. The incidence of light
directly on the touchpanel will redu-
ce the contrast.
Wall mounting
The MOCT 711-... can be surface-
mounted on the wall without the
need for system-linked accessories.
1 Open the unit
2 (no illustration)
Detach the plug-in connections bet-
ween the top and bottom part of
the housing at the terminal PCB.
3 Fasten the unit on the wall
4 (no illustration)
Connect in accordance with the
relevant circuit diagram.
Mounting the combination
BTS/BTC 750-... MOCT 711-...
5 Open the unit.
6 (no illustration)
Detach the plug-in connections bet-
4
ween the upper and lower part of
the housing at the terminal PCB.
7 Break off the prepared connecting
web „a" in the lower parts of the
housings and screw the two lower
housings together using the 2 con-
necting elements enclosed with the
monitor.
8 Fasten the units on the wall.
Connect in accordance with the
relevant circuit diagram.
9 Connect the BTS/BTC 750-...
MOCT 711-... to the video 2-wire
bus.
The VBE 650-... must be supplied
via a separate VNG 602-...
At the VBE 650-... , slide switch S2
and S4 must be set to the ON posi-
tion.
i
Circuit diagram information
w Plug in and connect the connec-
ting cable for the monitor and
BTS/BTC 750-... which is enclosed
with the VBE 650-... . Please obser-
ve the product information.
10 Connect the BTS/BTC 750-...
MOCT 711-... to the Siedle In-Home
Bus.
The BVE 650-... must be supplied
via a separate VNG 602-...
i
Circuit diagram information
w Plug in and connect the connec-
ting cable for the monitor and
BTS/BTC 750-... which is enclosed
with the BVE 650-... . Please obser-
ve the product information.
y In order to loop through from one
BVVU 650-... to other BVVU units,
first remove the terminating element
at "TaD" and "TbD".
11 Connect the BTS/BTC 750-...
MOCT 711-... with coaxial cable.
12 Comparison MO 611-.../
MOM/MOC 611-.../ MOM/MOC/
MOCT 711-... .
13 Replace the plug-in connections
between the upper and lower part
of the housing on the terminal PCB
of the MOCT 711-..., push the insu-
lating sleeve over the coaxial con-
nector and close the housing ele-
ments.
14 User interface of the
MOCT 711-...
a Touchscreen panel
b Buttons for picture colour
contrast control
c Buttons for picture brightness
control
d Switching on the monitor
Press the Play button once:
- Display stored images (the latest
image is displayed first)
Press the Play button twice:
- Direct image mode, only possible
with permanently active video signal
Requirement: e.g. camera continu-
ously operational, DIL switch 1
(MSS) on OFF.
The system must also support these
functions (e.g. coaxial video).
e Reset - Switching off the monitor
f Control buttons for camera
control
g BCD switch to set the timer. Only
adjustable with the upper part of
the housing removed.
h System connecting terminals
Ta, Tb
i Socket for the adapter cable to
the notebook
15 DIL switch S2
1 = MSS - Direct image mode;
Switch on with "Play" button
2 = Continuous operation
As-delivered status
!
1 = ON - Direct image mode off
2 = ON - Continuous operation off
Settings:
0
=
0 secs. (timer off)
1
=
10 secs.
2
=
20 secs.
3
=
30 secs.
4
=
40 secs.
5
=
50 secs.
6
=
60 secs.
7
=
90 secs.
8
= 120 secs.
9
= 180 secs.
Status on delivery
0
=
0 secs.
Advertenties
Inhoudsopgave
