Inhoudsopgave
Advertenties
BoseProfessional.com
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM5SE loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.
Loudspeaker Settings
Using a Safety Cable
Some regional construction codes require the use of a
secondary method of securing loudspeakers to support
structures to provide additional safety. Choose a mounting
position, method, and hardware consistent with local building
codes and regulations.
A safety cable can be attached to the loudspeaker using the
threaded insert on the back of the enclosure.
The insert is sized for an M6 screw (not included) with a depth of
15 millimeters (0.59 inches).
Installation Guide • DesignMax DM5SE
IN
OUT
70
70
/
/
100V COM
8
8
COM
100V
70V/100V
3W
6W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
) to 14 AWG (2.1 mm
) size wire only.
2
2
70V
6W
12W
12W
25W
100V
** NC: No Connection (do not use)
Setup
8Ω
25W
50W*
8Ω
50W
NC**
English • 5
Advertenties
Inhoudsopgave
