Inhoudsopgave
Advertenties
⃝
In standby mode, touch
mode among P1- P2-P3-P4-P5- UP, then touch
confirm setting.
4.1. P1, P2, P3, P4, P5 modes are default program for
quick setting
•
P1: all day comfort mode
•
P2: mode for general family
•
P3: mode for working office
•
P4: mode for commercial plaza
•
P5: mode for family on travel or trip
1-7
P1
1-5
P2
6-7
1-5
P3
6-7
1-7
P4
1-7
P5
4.2. UP mode is week timer setting of comfort / anti-frost
set by end-user.
Once UP mode setting is activated, figure 1 (Monday)
1 2 3 4 5 6 7
of
and
light up.
Example 1 - set one or three (at most) time-range at
comfortable level, then follow steps as below,
⃝
⃝ - -
+ +
Touch
or
, LED
⃝
+ +
&
flashes. Touch
or
1st working-hour among 0-23. Once selected, touch
⃝
+ +
to confirm it. Touch
to set end time. Then touch
to confirm 1st setting.
English
Mode
button to switch working
⃝
Prog
Working mode
begin flashing,
display 1 (1st working-hour)
⃝ - -
to select the start time of
⃝
⃝
Note: it must be at least 1 hour more than start time.
to
LED
turn to display 2 (2nd working-hour), repeat the
same steps of 1st working hour to set 2 more time-range at
most upon your need.
After one day setting is finished, figure 2 (Tuesday)
1 2 3 4 5 6 7
of
steps above to set working hour of each day among
1 2 3 4 5 6 7
.
⃝
Example 2 - Touch
leave that day at anti-frost function,
Note: each step must be operated within 2 min, or it
will exist setting and screen will recover to initial display.
Anti-frost: appliance keep room temperature at default
5°С to prevent frost.
Comfort: comfortable level achieved by setting power
and temperature upon need. (Reference to step 2&3)
5. Body Sensor
Once UP mode is set, body detector will be activated at
the same time. Icon
When the pre-set timing of week timer comes, appliance
will start heating. At the first 15 minutes, if no absence
is detected in the room, appliance will stop heating and
stay at standby mode. Once body sensor finds any come-
in person, the appliance will start heating again.
Note: Body detector only take effects on comfort
mode. No function in anti-frost mode.
6. 24 Hour Timer – Auto Off
⃝
In P1 mode, touch
timer setting, icon
to set timer among 0 to 24. Leave the setting for 5s,
stop flashing,
stop flashing and will keep lighting
up, timer setting is confirmed. Screen
ambient temperature and counting-down hour in turn.
⃝
Touch
again could cancel the setting. Screen will
turn to show room temperature.
7. Child Lock Function
In working mode,
⃝
+ +
long touch
and
to activate child lock function, screen will show
setting and will recover to initial display in 5 seconds.
begin flashing, repeat the same
⃝
+ +
directly instead of
or
will light up.
twice quickly to activate 24 hour
⃝
+ +
&
flash. Touch
will show
⃝ - -
at the same time for 3 seconds
Usage and Storage Instructions
EN
⃝ - -
, to
⃝ - -
or
[ ]
after
7
Advertenties
Inhoudsopgave
