UK: INSTRUCTION MANUAL
5. Faults:
The power station has the following protective functions:
- Short circuit protection
- Over charge protection
- Over discharge protection
- Over current protection
- Extreme low power protection
- Over temperature protection
- Reverse connection protection
- Anti-charge protection
- Over voltage protection
Overload warning: If any output circuit is being overloaded, e.g. a device drawing more power than the
circuit's rating, the safety shutdown of that circuit will engage. Warning will be in the form of an alarm beep
combined with the displayed overload icon.
The affected circuit will be shut off. To rectify, unplug the device in question and turn the circuit on again (20)
– (23) to use the power station.
Temperature warning: If temperature of the inverter or battery cells exceeds its range, the temperature
warning icon will be displayed along with an alarm beep, and the power station will shut off. Let the power
station cool down before continued use.
Integral fans prevent the power station overheating under heavy loads and the fan icon will be displayed
when these fans are in action.
If you are unable to rectify any fault following the above instructions, contact the dealer or Outwell Customer
Service.
6. Disposal:
Dispose of the power station as battery waste according to local regulations.
Do not dispose of any batteries with general household waste.
7. Light Source: LED
The light source and control gear is not replaceable. Access to light source and control
gear brings contact with high voltages and a high risk of electric shock.
Making the light source and control gear replaceable would also introduce weak points
in the construction that could reduce the lifetime of the product.
6
UK: INSTRUCTION MANUAL
8. Technical data:
Battery type: Lithium-ion
Battery capacity: 626Wh
Battery charge cycle life: 1,000 cycles
Operation temperature: -20°C – 55°C
Charging temperature: 0°C – 45°C
AC inverter type: Pure sine wave
AC inverter output: 220V
50Hz 600W (900W peak)
DC input: 12-30V
max 100W
Solar controller type: MPPT
DC output: 14.4V
10A (x3)
USB-C/PD in-/output: 5-20V
max 60W
USB A output: 5V
2.4A (x3)
USB A QC output: 5V
3A, 9V
2A, 12V
Outwell Customer Service
e-mail: info@outwell.com
Tel.: +45 70 50 59 00
1.5A
7