8
Commissioning and operation
8.1 Preparing the ACO203 / ACO203 BT / ECO203
CAUTION!
Fingers risk being crushed if the device is operated without a press
jaw/adaptor jaw (Fig. 4)
If no press jaw/adaptor jaw is fitted, fingers could be placed in the at-risk zone. Fingers
could be crushed when the device is started.
Therefore:
–
–
Information!
The device will not start if the retaining pin (8) is incorrectly inserted. The green LED
flashes.
Information!
The press device is not suitable for continuous operation. Following 30 minutes
of continuous operation, a short break of at least 15 minutes must be taken to
allow the device to cool down.
•
Do not operate the device without press jaws.
Keep your fingers away from the at-risk zone.
Insert the press jaw/adaptor jaw into the press device as shown in Fig. 5 to 7.
ACO203 / ACO203 BT / ECO203
19
EN