Advertenties
Beginning work with the machine
Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Cleaning start
• Plug the power supply cord into the mains socket.
• Switch on the machine (key switch).
Switch lights up
• Hold the machine firmly by the han-
dle and bring it into the working posi-
tion (2) by pressing the red footpedal
(1).
1
The electrical brushes switch on.
2
• Press the suction switch (1) to switch
on the suction unit (no lamp).
2
• Press the water pump switch (2) to
switch the water pump on
1
Switch lights up
Setting the brush pressure
Attention:
If the red brush pressure control lamp
lights up, correct the brush height as de-
scribed below.
• Adjust the brush height (brush pres-
sure) by turning the regulator until the
green display lights up.
MIN
MAX
LED display
Status indicator
Display green
Brush height (brush pressure) correctly
set.
Display red
Correct the brush height (brush pres-
sure). Turn the setting knob to the right for
more, and to the left for less brush pres-
sure.
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in sev-
eral work steps.
Notice:
More precise details regarding the direct
and indirect working method can be found
on the respective method sheet.
Please contact your TASKI customer con-
sultant for further details.
Replenishing cleaning solvent
Attention:
The flooring may be damaged when work-
ing without cleaning solution.
Notice:
A rattling sound of the pump indicates that
the fresh water tank is empty.
Attention:
The pump must never run dry for an ex-
tended period.
• The machine must be switched off.
• Open the tank lid.
• Fill the fresh water tank with water, see page 64.
• Add the cleaning product using the dosing cup.
• Close the tank lid.
EN
65
Advertenties
