Inhoudsopgave
Advertenties
4 Operation
Overview
Cover
Commissioning (incl. pairing)
DEU
DEU
For pairing the room sensor, the software version SW 01.90 or
higher must be installed on the base station. The pairing be-
ENG
ENG
tween room sensor and base station is performed via a radio
connection. The radio range of the devices must be observed for
FRA
FRA
this. If the radio range is insufficient, the position of the room
sensor must be changed, or the radio range of the base station
NDL
NDL
must be extended using corresponding accessories.
ITA
ITA
9 Fresh batteries are inserted in the
room sensor.
ESP
ESP
9 No other base station within the ra-
dio range is active in paring mode.
¾ Activate the pairing mode at the base
station for the desired heating zone
(see base station manual).
¾ Take off the cover.
¾ Press the Set button (see figure) for
more than 1 second in order to activate the pairing mode.
9 The base station and the room sensor are paired. The paring
mode ends automatically after the process has finished.
¾ Re-install the cover.
18
18
Casing
Set button Set value element
Advertenties
Hoofdstukken
Inhoudsopgave
