Download Inhoudsopgave Inhoud Print deze pagina

Bosch UniversalRotak 650 Oorspronkelijke Gebruiksaanwijzing pagina 14

Inhoudsopgave

Advertenties

14 | English
tion. The operating voltage is 230 V
AC, 50 Hz (for non-EU countries
220 V, 240 V as applicable). Contact
your Bosch Service Centre for details.
If in doubt contact a qualified electri-
cian or the nearest Bosch Service
Centre.
For increased electrical safety use a
Residual Current Device (RCD) with a
tripping current of not more than
30 mA. Always check your RCD every
time you use it.
Keep the supply cables away from
moving hazardous parts and avoid
damage to the cables; this can lead to
contact with live parts.
The connections (plugs and sockets)
should be kept dry and off the ground.
The supply cables must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cable on the product is
damaged, it must only be replaced by
a Bosch Service Centre. Only use ap-
proved extension cables.
Use only extension cords, cables,
leads, cable reels that comply with EN
61242/IEC 61242 or IEC 60884-2-7.
If you want to use an extension cable
when operating your product, only the
following cable dimensions should be
used:
– Nominal conductor area of
2
1.25 mm
or 1.5 mm
– Maximum length 30 m for a Cord
Extension Set or maximum length
1 609 92A 5BX | (04.09.2019)
Note: If an extension cable is used it
must be earthed and connected
through the plug to the earth cable of
your supply network in accordance
with prescribed safety regulations.
If in doubt contact a qualified electri-
cian or the nearest Bosch Service
Centre.
plug and socket must be of water-
tight construction and intended for
outdoor use.
Maintenance
Always wear gardening gloves
u
when handling or working near the
sharp blades.
Keep all nuts, bolts and screws tight
u
to ensure safe working with the
product.
Check the grass catcher frequently
u
for wear or deterioration.
Inspect the product and replace
u
worn or damaged parts for safety.
Ensure replacement cutting means
u
of the right type are used.
Ensure replacement parts fitted are
u
Bosch-approved.
Before storing, make sure that the
u
product is clean and free of residue.
2
If necessary, clean with a soft dry
brush.
of 60 m for a Cable Reel with Re-
sidual Current Device (RCD).
WARNING! Inadequate ex-
tension cables can be dan-
gerous. Extension cable,
Bosch Power Tools

Advertenties

Inhoudsopgave
loading

Inhoudsopgave