Inhoudsopgave
Advertenties
3
Description
3.1
Overview of the product
3.2
Items supplied
Blind-rivet setting tool, 4 nosepieces, wrench, removable mandrel container, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.3
Intended use
The product described is a hand-held cordless blind-rivet setting tool.
▶ Use only Hilti Li-ion batteries of the B22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for these batteries.
3.4
Lithiumion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are indicated by the display on the Liion
battery. The Liion battery state of charge is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED flashes.
1 LED flashes, the power tool is not in working or-
der.
4 LEDs flash, the power tool is not in working or-
der.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs flash, please observe the instructions given in the Troubleshooting section.
3.5
Overload protection
If an overload occurs the tool switches off automatically and the overload LED flashes for 10 seconds.
The tool cannot be used during this time. Overloading is generally caused by residues in the jaw
mechanism, which has to be cleaned accordingly. Follow the instructions on removing residues in the
section on care and maintenance. The tool should start working again once the blockage has been
removed.
*2225140*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
2225140
Nosepiece
Steel sleeve
Jaw housing
Jaws
Jaw pusher
Pressure spring
Adapter
Mandrel container
Battery charge-status and fault indicator
Battery release buttons (also used to activate
the charge status indicator)
Battery
Light source / overload LED
Switch
English
17
Advertenties
Inhoudsopgave
