Place the device on the base and connect to suitable power supply.
Press on/off-lever. The operation indicator will light up to show that the device is heating
up. The operation indicator will switch off when boiling has finished. The device switches
off automatically.
During the boiling process you can stop heating at everytime by pressing on/off-lever or
lifting the pot.
Lift the pot from the base. Pour the boiling water through the spout.
► Use caution when pouring the hot water and do not open the lid.
Unplug the device when not in use. Clean and dry it and put it back on the base.
15.3 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
15.4 Safety information
Please observe the following safety notices, before you commence with cleaning the
device:
► The Coffee Classic Kettle must be cleaned at regular intervals and limescale should
be removed.
► Switch off the Coffee Classic Kettle prior to cleaning it and unplug the plug from the
wall power outlet.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not immerse pot, base or power cord in water.
15.5 Cleaning
Pot
Rinse the pot with a damp cloth.
15.6 Descaling
Depending on the hardness of water you should descale the device once every two
weeks.
Fill the pot with water and a commercial descaler or give a sip of vinegar into the
water. Heat the mixture but do not boil it to prevent overcooking. Rinse the pot with
fresh water after descaling.
Warning: Risk of scalding
Attention
30