EN
4. The waffle iron will heat up after about 3 minutes, indicated by the thermostat light (6) going out.
Check the cooking quality of the first waffles to adjust the time or temperature settings if neces-
sary.
5. Once the waffle iron is heated, open the top lid (2), place the batter on the bottom heating plate (1)
and gently close the lid.
6. When closing and opening the lid, watch out for hot steam coming out of the sides of the waffle
iron
7. Open the top cover (2) and remove the waffles, using only plastic or wooden spatula.
CAUTION: DO NOT USE METAL CUTLERY AS THIS MAY DAMAGE THE SURFACE OF THE
HOT PLATES!
8. When cooking is complete, turn the thermostat knob (6) to 0, unplug the appliance and allow the
appliance to cool down completely.
CLEANING AND MAINTENANCE
1. Before cleaning (and after baking), pull out the plug from the outlet and allow the appliance to cool
down completely.
2. Thoroughly wash the heating plates (1) using damp cloth or towel.
3. Wipe the external surface of the waffle-maker using wet cloth.
NOTE! Do not immerse the appliance in water or any other liquids! Do not wipe the inside of the
appliance with acute, abrasive cloths or sponges, as this can damage the heating surfaces!
TECHNICAL DATA
See the product's nameplate for technical specifications.
Length of power cord: 0.65 m
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
18