Inhoudsopgave
Advertenties
OPERATING INSTRUCTIONS
CHARGING
WARNING
The Venom 2 should only be charged with the double insulated, 18VDC
Hyperice charger (model number MX24Z2-1801000) that was supplied with the
device. Do not charge the Venom 2 overnight or leave the Venom 2 unattended
when charging or in use.
To charge, connect the adapter into the battery's charging port and plug the charging
cord into a wall outlet. Fully charge the battery for up to six hours before first use. A
LED light pulses to show the battery level and indicate active charging. Full charge is
indicated when the LED light stops pulsing and remains fully illuminated green. The
device will display the battery level when turned on. Unit may be recharged at any
time and at any battery level. It is not recommended to fully deplete the battery to the
orange LED level. Recharge the unit monthly to best prolong battery life.
OPERATING
Wrap the compression wrap around the proper body part (back, leg, or shoulder)
and attach straps with a snug, but comfortable, fit so the four vibration pods are
positioned as desired. Ensure battery is charged. Press the ON button to activate
the unit. The Hyperice logo will illuminate red to show Venom 2 is activated.
Choose the desired heat and vibration options with the buttons on the top of
the pod. The device will automatically start when the heat or vibration button is
pressed. Press the heat or vibration button again to the desired level. The device
will turn off automatically after 15 minutes without further input. The device will
vibrate twice to signify the end of a session or three times to signify a low battery.
To continue use, simply press the heat or vibration button, and set to the desired
level. A fully charged battery will power the device for around two hours at level
three heat, and longer at lower levels
CONNECT TO THE HYPERICE APP
To connect your device to the Hyperice App via Bluetooth
make sure that your
®
device is turned on, Bluetooth is turned on in your phone, and your device is
within range of your phone. The Bluetooth LED on the pod will pulse blue, which
means it is waiting to pair. If prompted, tap "Scan for Devices." Select your device
when it pops up on the screen. Once you pair your Venom 2, HyperSmart™ will
allow you to automatically start your session and control the heat and vibration
settings from within the Hyperice App.
CLEANING AND STORAGE
Use a towel or soft cloth to wipe any moisture from unit. Keep unit away from
heat sources, liquids, and children. Store in a clean, cool, dry place, out of direct
sunlight, when not in use. Recommend storage temperature between -10°C and
25°C/14°F and 77°F.
Advertenties
Inhoudsopgave
