ACCESSORY INCLUDED
ANTIBACTERIAL FILTER
To discover at www.airandme.fr
The water filtration cartridge GALET, com-
posed of silver ions, prevents the formation
of germs.
Easy to use, it shall be immersed in water. No
more bad smells and algae anymore. The
air is healthy and pure.
We recommend that you change it every 6
to 12 months, depending on the frequency
of use of the device.
ACCESSOIRES (NOT INCLUDED)
AROMATHERAPY
To discover at www.airandme.fr
air & me offers a wide choice of essential oils
made in France.
A way to make the most of your Clarence
humidifier while enjoying the benefits of aro-
matherapy.
FILTRATION CARTRIDGE
To discover at www.airandme.fr
The water filtration cartridge for Clarence
reduces limescale deposits.
Composed of ionic and cationic beads, it
guarantees healthy and good quality va-
por, eliminating bacteria and viruses.
Easy to use, it is screwed inside the tank cap
and then remains immersed in water.
We recommend that you change it every 4
to 6 months, depending on the frequency
of use of the device and the hardness of the
water used.
18
FAQ
Circumstance
Reason
> The product is not correctly
plug or there is an electrical
problem.
> There is a problem on the
The product
electrical system of your
does not work
house.
> The tank is empty.
> The tank is not properly
placed.
The power
indicator is lit, but
> The humidity level chosen on
the appliance
the electronic hygrostat or
does not
via HygroSmart® is reached.
produce steam
at the outlet
> There is not enough water in
the tank.
Abnormal noise
> The device is not on a stable
surface.
> The appliance tank must not
be filled from above.
> The tank cap is not properly
The appliance
closed.
leaks
> The seal of the tank cap has
fallen off during filling.
> The room to be humidified is
The humidity
over-sized.
indicated by the
device does not
change
> The hygrometer sensor is dirty.
> The sensors both have a
Humidity and/
margin of error:
or temperature
Thermometer: ± 2°C
seem wrong
Hygrometry: ± 5%
> The product is new.
Moisture
produced has an
> The water in the tank is dirty
unpleasant smell
(stagnant or contaminated).
Solution
> Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system. Avoid multi sockets.
> Fill the tank.
> Push and place the tank properly.
> Add water to the tank.
> Position the tank on a flat and stable
surface.
> Fill the tank as indicated.
> Tighten the tank cap securely.
> Replace the seal in the cap.
> Compare with a third-party
hygrometer to check if the
hygrometer of the device is
defective.
> Clean the hygrometer by blowing
into the sensor hole to dislodge any
dust particles
> Empty the tank and base and wash
and dry both parts before turning
the unit on again.
19