Inhoudsopgave
Advertenties
20
control/maintenance
Intensive setting (SLK680/980)
You can temporarily switch the extractor hood to the highest setting – in order,
for example, to remove the odour quickly if something has burned.
Press switch
to switch to the intensive setting. The extractor hood switches
to its highest setting (4) for 5 minutes, and then switches back to the original
setting.
Timer (SLK680/980)
Press switch
,
selected setting for 5 minutes, after which the extractor hood and the lighting
are automatically switched off.
Grease filter indication (SLK680/980)
The degree of saturation of the grease filter is indicated by means of a
luminous display.
If button
is pressed when the extractor hood is switched off, the display
lights up; the colours displayed have the following meanings:
green light: in use for less than 6 working hours
yellow light: in use for 6 to 12 working hours
red light: in use for more than 12 working hours (the grease filter should be
cleaned or, if necessary, replaced).
Carbon filters
The carbon filter must be used if the cooker hood is not connected to a duct
(see extraction systems on page 18).
Note:
The carbon filter must be replaced at least twice a year, depending on how
much the cooker hood is used.
Carbon filters cannot be cleaned to use again.
Saturated carbon is harmful to the environment, replace the filter regularly.
or
for 2 seconds. The extractor hood remains at the
Advertenties
Hoofdstukken
Inhoudsopgave
