Inhoudsopgave
Advertenties
• If it is difficult to remove the magnet from
the frame, insert the included leverage
magnet lifter under an edge of the magnet,
and move it in the direction of the arrow
to remove the magnet.
1 Leverage magnet lifter
• After using the magnetic sash frame, store
it with the magnets attached and fabric in
between. If the magnets are attached
directly to the frame, it will be difficult to
remove them due to their strong magnetic
force.
Attaching the magnetic sash
frame
• After attaching the frame to the machine,
hoop fabric in the frame. If large pieces of
fabric are hooped in the frame before the
frame is attached to the machine, the
thumb screws that secure the frame will be
hidden under the fabric and cannot be
tightened, or the fabric may be pulled out,
knocking off the magnets.
1
Loosen the two thumb screws, and then
remove the embroidery frame holder and
thumb screws.
1 Thumb screws
• The removed thumb screws will be used to
install the magnetic sash frame.
2
Attach the wide table to the machine.
For details on attaching the wide table, refer
to the Operation Manual included with the
machine or the instructions included with the
wide table.
2/6
Advertenties
Inhoudsopgave
