If there is a prolonged period of inactivity, we recommend that you make the cleaning and maintenance described above.
4
Operation
4.1 Definitions
The blast chiller and freezer has been designed to blast chill and freeze food products and it was created to work at ISO 4 climate class (30ºC
maximum room temperature and 55% relative humidity).
4.2 Technical file
Model
Exterior dimensions
WxDxH
Weight
Power supply
Current
Power consumption
Refrigerant
Cooling capacity
Freezing capacity
GN1/1 – EN600x400
Trays capacity
Max. load per tray
4.3 Setup
Ensure that the plug is correctly inserted into the socket and the circuit breaker into the electrical circuit box of the blast chiller & freezer is on.
4.3.1
Start-up
This procedure applies only at start-up or in case of a local power supply fault or when it is switched off.
Without pressing any key, after 60 seconds the displays shows the language in which menus are available.
4.3.2
Start a new cycle
This procedure applies in the normal operation of the equipment.
Press
for 3 seconds;
Then, select a standard cycle (see 4.4), or a custom cycle (see 4.7) (if previously programmed), or enter the programming mode to do it.
The electronic controller allows custom cycles according to specific needs. The respective instructions are in the 4.6 paragraph of the attached
electronic controller manual.
MNS00054.02
PRT
Instruction Manual
Y2-3
670x715x500 mm
810x830x850 mm
55 kg
100 kg
220-240V 1~ 50Hz
220-240V 1~ 50Hz
3,0 A
0,5 kWh
1,0 kWh
R404
10 kg
6 kg
3-3
4,5 kg
4,5 kg
Select the language using
Then, press
From now on, the equipment is ready to operate. You can select one of the standard cycles