Inhoudsopgave
Advertenties
Replacing the oven light bulb
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
The bulb is located inside the oven on the back wall.
1. Rotate the lamp cover to remove.
2. Unscrew and replace the bulb with a new one suitable for high
temperatures (300°C) with the following specifications:
230V, G9, 25W.
3. Twist the lamp cover back on.
TECHNICAL DATA SHEET
Below is the sheet of domestic oven according to EU regulation No. 66/2014.
Model identification
Type of oven
Mass of the appliance (M)
Number of cavities
Heat source per cavity (electricity or gas)
Volume per cavity (V)
Energy consumption (electricity) required to heat a
standardized load in a cavity of an electric heated oven
during a cycle in convectional mode per cavity (electric
final energy) (EC
electric cavity
Energy consumption required to heat a standardized
load in a cavity of an electric heated oven during a cycle
in fan-forced mode per cavity (electric final energy)
(EC
)
electric cavity
Energy Efficiency Index per cavity (EEI
Ecodesign requirements according to EU regulation No. 66/2014
Item
Value
EEI
106
cavity
)
cavity
Stage 1
1 year after
enter into force
<146
EN-14
TMFP 70 IX
Built-in electric oven
39kg
1
Electricity
70L
0.99 kWh/cycle
0.89 kWh/cycle
)
106
Stage 2
3 years after
entry into force
<121
Stage 3
5 years after
entry into force
<96
Advertenties
Hoofdstukken
Inhoudsopgave
