Inhoudsopgave
Advertenties
Technical data
Technical data
Weight
Weight, kg
Noise emissions
(see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Noise levels
(see note 2)
Equivalent sound pressure level at the operator's ear, measured according to
EN15503 dB(A)
Vibration levels
(see note 3)
Equivalent vibration levels (a
2
EN15503, m/s
Front/rear handles:
Fan performance
(see note 4)
Max. air velocity with standard nozzle, m/s:
Air flow with standard nozzle, m
Note 1: Noise emissions in the environment measured as sound power (L
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: The equivalent sound pressure level value is calculated with a work cycle of a duration of 1/7 for idling and 6/7
for racing. Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion
(standard deviation) of 1 dB(A).
Note 3: The equivalent vibration level value is calculated with a work cycle of a duration of 1/7 for idling and 6/7 for racing.
Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
Note 4: Together with 525LK/GC2225C engine unit.
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the blower
attachment Husqvarna/Jonsered BA101 with serial numbers dating 2015 and onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. The following standards have been applied:
SS-EN15503:2009+A1:2013, SS-EN ISO 12100:2010
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered:
SEC/14/2416
For information relating to noise emissions, see the Technical data chapter.
Huskvarna, 6 July 2015
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
10 – English
TECHNICAL DATA
dB (A)
WA
) at handles, measured according to
hv,eq
3
/min
BA101
1,9
109
112
99
5,6/8,3
66
15
) in conformity with EC directive 2000/14/
WA
2
.
Advertenties
Hoofdstukken
Inhoudsopgave
