1. Fill the kettle with water. Do not overfill. Use the water level indicator.
2. Place the kettle on the base.
3. Electrical connection
• Check whether the electrical voltage which you intend to use is the same as that of the
kettle. Details can be found on the label on the base of the kettle.
• Only connect the kettle to a properly installed 220-240V 50/60Hz socket.
4. Switch the kettle to position '1'. The control lamp on the water indicator shows that the water
is being boiled.
5. After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
6. This appliance is intended to be used in household and similar applications such as:
staff kitchen areas in shops, offices and other working environments;
-
farm houses;
-
by clients in hotels, motels and other residential type environments;
-
bed and breakfast type environments.
-
7. Avoid water spillage on connector during use.
8. Warning: If the kettle is overfilled ,boiling water may be ejected.
CLEANING
Cleaning and maintenance should not be carried
out by children unless they are at least 8 years of age
and are supervised by an adult.
Always remove the plug from the mains supply before
cleaning the kettle.
The exterior of the kettle should be cleaned, if necessary,
with a slightly damp cloth without additives.
The calcium filter can be removed for cleaning
Power Supply: 220-240V 50/60Hz 1850-2200W
WARRANTY
The warranty period for our products is 2 years, unless otherwise stated, starting from the date of
initial purchase or the date of delivery.
If you have any problems or questions, you can easily access our help pages, troubleshooting tips,
FAQ, and user manuals on our service site: https://sav.hkoenig.com.
By typing the reference name of your device in the search bar, you can access all available online
support, designed to best meet your needs.
If you still cannot find an answer to your question or problem, then click on "Did the answer solve
your problem?". This will direct you to the Customer Support Request Form, which you can fill out
to validate your request and get help.