UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the product be irreparably damaged. The product must also be
directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS AND CONNECTIONS
1.
Microphone Input
6.3mm ¼ input jack for connecting a microphone.
2.
Line Input
RCA jack input for connecting audio units with line level output
(e.g. mixer, CD player).
3.
Wireless Microphone Level
Adjust the signal level of wireless microphone.
4.
Microphone Level
Adjust the signal level of microphone.
5.
Input selector switch
Selects the input signal:
• Button not pressed: signal of the line input.
• Button pressed: signal of media player.
6.
Line/MP3 Level
Adjust the level of line- or mediaplayer-signal.
7.
Treble
Adjust high tone control.
8.
Bass
Adjust high low tone control.
9.
Battery indicator
LED indicator for battery charging.
10. External battery
Connection for alternative power supply from a 12Volt DC source.
11. SD port
Connect your SD/MMC card in this slot to play music with MP3 or WMA
format.
12. Mode button
Press the button to select BT/USB/SD function.
13. Play button
For switching between play and pause.
14. Folder button
Press this button to open the foldermap of USB or SD-card.
15. Repeat button
Press key for repeating of single track or all tracks.
16. Forward - Backward button
For title selection (short actuation) and fast forward/reverse (long
actuation).
17. USB port
Connect your USB devices to this slot to play music with MP3 or WMA format.
3