Inhoudsopgave
Advertenties
CLEANING AND MAINTANANCE
When the filters are blocked due to excessive dust, they must be cleaned and if necessary, they can
also be replaced. To ensure maximum efficiency, it is suggested to clean the filters regularly (at least
twice a month) and to replace the filters at least once a year. Both cleaning and replacement depend
on use. More frequent cleaning may be required when vacuuming fine dust or using the machine
intensively.
Clean the dust box
Caution! Turn off the vacuum before cleaning it.
If the dust box is filled with dust, the vacuum may stop to prevent overheating.
Clean the dust box before it fills to the MAX line.
Clean the filters
1. Press the dust cup release button to release the dustcup.
2. Turn the inlet HEPA filter clockwise to release it.
3. Pull out the metal filter compartment.
4. Turn the outlet HEPA filter anti clockwise to release it.
5. Shake off debris by tapping the filters against your trash container
6. Wash the filters with cold water only, under a running tap. Repeat washing the filter until clean water
runs. Do not immerse into water.
7. Tap the filter to remove any excess water and leave to dry completely. Allow the filters to dry
completely in a dry area with good air circulation for at least 24 hours, away from direct sunlight,
heat sources like heating appliances etc.
Make sure the filters are completely dry before installing them.
CAUTION:
•
Do not clean the filters in a washing machine.
•
Do not use a hair dryer to dry them.
•
Never use the appliance without filters.
Advertenties
Inhoudsopgave
