For energy saving reasons please ensure that the door is closed when the appliance is
turned on.
13.5.2
Feet
There are different feet (3 bigger feet and 1 small foot).
To level your appliance, adjust the small foot at the bottom of the appliance.
13.5.3
The handle installing
The wine cooler comes with one metal
stainless steel handle. To install simply
screw them to the door with the supplied
screws.
To do this, slide the rubber seal on the back
of the door to the side to lay open the
predrilled holes.
Use the included screws to install the
handle on the door.
Then reinsert the rubber seal in the correct
position.
13.5.4
Shelves
Storrage depending on kind of bottle and
size. You can remove each shelf to store
larger bottles.
Usual shelf
To remove a shelf: Remove all bottles from the shelves. Lift the shelf upwards and the gently
pull it out, (eventually untighten the screws).
Please note
► Ensure that the shelves are firmly engaged in place before storing any bottles.
► Spread your bottles out as evenly as possible over the shelves, so weight is not
concentrated in one point; and make sure your bottles will not touch the back of the
cabinet.
Lower shelf
32