Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Determine the installation direction of
the hood. If the LEDs are on the right
hand side from the user's perspec-
tive, the flap opens in the user's di-
rection.
3. Determine the position of the extrac-
tor hood centrally over the hob (use a
plumb line for help) and mark the centre
point of the hood on the ceiling. Mark
the fastening holes from the
4. Drill four holes (Ø 10 mm) and insert
the wall plugs. Screw the hanger bolts
into the wall plugs until approx. 20 mm
protrude.
5. Before hanging the hood body (A),
remove the filter insert (E) by removing
the screw connection (F).
4
M5 x 12
en
19
Advertenties
Inhoudsopgave
