Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
To make an accurate estimation of the
vibration exposure level, it is also necessary
to take into account the times when the tool
is switched off or running but not actually in
use. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
Instructions for use
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before initial operation
Unpack the mixer and check that there are
no missing or damaged parts.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge
the batteries fully. Refer to the charger
operating manual.
Inserting/replacing the battery
Press the charged battery into the power
tool until it clicks into place.
16
To remove, press the release button (1.)
and pull out the battery (2.).
CAUTION!
When the device is not in use, protect the
battery contacts. Loose metal parts may
short-circuit the contacts; explosion and fire
hazard!
Battery state of charge
Press the button to check the state of
charge at the state of charge indicator
LEDs.
The indicator goes out after 5 seconds.
If one of the LEDs flashes, the battery must
be recharged. If none of the LEDs light up
after the button is pressed, the battery is
faulty and must be replaced.
NOTE
Follow the instructions for charging the
battery set out in the charger operating
manual.
Mounting/changing the mixer
paddle
Tool with spindle lock
Press the lock and turn the gear selector
switch in anti-clockwise direction to
Bolt the paddle onto the drive
spindle (2.).
Tighten the mixer paddle with an open-
end spanner AF 22 (3.).
MXE 18.0-EC
(1.).
Advertenties
Hoofdstukken
Inhoudsopgave
