• To prevent damage to blender, container,
or cutter assembly, DO NOT move or
shake blender while in operation. If
blending action stops during operation,
turn blender OFF (O), remove container
from base, remove container cover,
and use a thin rubber spatula to push
mixture towards cutters.
• When blending hot liquids, remove
center piece of two-piece lid. Hot liquids
may push lid off jar during blending.
To prevent possible burns: Do not fill
blender jar beyond the 1 quart (946 ml)
level. With the protection of an oven mitt
or thick towel, place one hand on top
of lid. Keep exposed skin away from lid.
Start blending at lowest speed.
• Always operate blender with container
cover in place.
• This blender is designed with motor
overload protection. If the motor stops
during operation due to overheating,
unplug the unit and allow it to cool down
for 15 minutes. Plug unit back in after 15
minutes to resume normal operation.
• The normal function of this product may
be disturbed by strong electromagnetic
interference. If this occurs, simply
reset the product and resume normal
operation by following the operation
manual. If normal operation cannot be
resumed, place the product in a
– SAVE THESE IN STRUC TIONS –
different location.
• Do not operate any appliance with a
damaged supply cord or plug, or after
the appliance malfunctions or has been
dropped or damaged in any manner.
Supply cord replacement and repairs
must be conducted by the manufacturer,
its service agent, or similarly qualified
persons in order to avoid a hazard. Call
the provided customer service number
for information on examination, repair,
or adjustment.
• Do not attempt to bypass interlock
features.
• The equipment is provided with a power
switch/circuit breaker. If the motor stops
turning, reset the switch.
• UK ONLY: If fitted with a non-rewirable
U.K. plug, the 13-amp fuse approved by
ASTA to be B.S. 1362 must be used. If
you need a replacement fuse carrier, it
must be replaced with the same colour-
coded carrier with the same markings.
Fuse covers and carriers can be obtained
from approved service agents.
• This appliance is intended to be used for
commercial applications, for example
in kitchens of restaurants; canteens,
hospitals and in commercial enterprises
such as bakeries, butcher shops, etc.,
but not for continuous mass production
of food.
3