Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The disposal must comply with the current
local regulations. Safety instructions
All safety instructions in this manual are
labeled with a warning symbol. They show
potential hazards at an early stage. It is
essential to read this information and
follow it up.
Explanation of safety instructions:
15 Battery level
Battery charge
state bars
1 bar flashing
1 bar flashing
1 bar steady light
2 bars steady light
1 bar flashing
3 bars steady light
1 bar flashing
4 bars steady light
3 bars steady light
2 bars steady light
1 bar steady light
1 bar flashing
4 bars flashing
No bars are lit
Battery charging
The charge of the battery pack is at a low level. Charge the battery completely before using
the appliance for the first time.
1. Charge the appliance in a safe place, well away from moisture and heat sources.
2. Always charge the battery completely before storing.
3. Check that the battery (12) is inserted completely into the battery connection (14).
4. Insert the adapter plug into the battery connection (14) in the base of the appliance and
the mains plug into the main plug socket.
The LEDs flash for 10 seconds before they display the current battery charge status (see
Table 1).
Colour
Mode
blue
Charging
In operation
Red
Defective
Not in
operation
The following symbols and warnings are
indicated in these instructions, on the
blender or on the packaging.
Battery level in %
Note
Battery charge level < 25
Battery charge level 25 < 50
Battery charge level 50 < 75
Battery charge level 75 < 100
Battery is fully charged
Battery charge level 75 < 100n
Battery charge level 50 < 75n
Battery charge level 25 < 50
Battery charge level < 25
Battery charging
Battery is defective
Battery is empty or the
appliance is switched off.
EN
Seite | 21
Advertenties
Inhoudsopgave
Probleemoplossen
