Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4
INFLATION GUN
For inflating tires, rubber dinghies, air beds, footballs and other
objects
PRESSURE LEVEL: 1 - 4 bar
Warning: Do not direct the jet of compressed air towards people or
animals.
Never inflate the objects above the recommended inflation pressure as
this may be dangerous and cause damage and/or injuries.
The gun is not suitable for inflating car tires. For this operation, use of the
approved inflation gun that can be purchased separately is recommended.
USE
1) Connect the inflation gun 2 to the compressor as explained in chapter
"2 - CONNECTING THE ACCESSORIES TO THE COMPRESSOR"
2) When inflating tires or certain bicycle tires, it is not necessary to insert
any of the adapters (fig. 5). Press tab E (fig. 3) and connect the hose of
the gun to the tire pushing the fitting on the valve and then releasing the
tab.
3) Regulate working pressure to the value indicated for this accessory (see
table 1)
4) Inflate the tire pressing lever F (fig. 4). Release the lever and read the
pressure reached on gauge G of the gun. Repeat the operation until the
pressure required is obtained (do not exceed the recommended inflation
pressure indicated in table 1). In the case of over-inflation, press button
H to reduce inflation pressure
Warning: do not hold down the lever too long before checking the
pressure reached as this could cause explosion of the object being
inflated.
5) When inflating footballs, rubber dinghies, certain bicycle tires and
children's inflatable swimming-pools, you may have to use a suitable
adapter (fig. 5).
Adapter 8 is used for footballs
Adapter 9 is used for rubber dinghies, air beds and children's swimming-
pools
Adapter 10 is used for certain bicycles
Select the suitable adapter and push it in the inflation hose pressing tab
E (fig. 6). Once it is inserted, release tab E.
To secure the adapter, turn it slightly in a clockwise direction
6) Inflate the object concerned as described in point 4.
TIPS FOR USING THE INFLATION GUN
Use the inflation gun at least once every two weeks in order to check that
your tires are at the right pressure; this promotes fuel economy, increases the
service life of your tires and improves safety as it reduces braking distances
and improves handling of the vehicle.
MAINTENANCE
Do not clean the inflation gun and adapters with solvents or flammable or
toxic liquids.
5
OTHER USES
Other uses* are possible purchasing the accessories separately.
TABLE 1 – RECOMMENDED OPERATING PRESSURES
FUNCTION
APPLICATION
To inflate: footballs
Dinghies, air beds,
children's swimming pools
Inflation
Tires
Ordinary bicycle tires
Mountain bike tires
To remove dust from ordinary objects
Blowing
To remove dust from precision equipment
To paint small surfaces at low pressure
Painting*
For airbrush work
For washing with air/water gun
Washing/
To spray detersives on engines
spraying*
To spray water/products on plants/flowers
Clinching/
For woodwork
Nailing*
** Consult the indications provided on the object to be inflated.
Please check that the air consumption and the maximum working
pressure of the pneumatic tool to be used are compatible with the
pressure set on the pressure regulator and with the amount of air
supplied by the compressor.
8
INFLATION
OPERATING
PRESSURE
PRESSURE
(IN BAR)
(IN BAR)
0,8 - 1**
0,5 - 1**
1 - 4
2 - 3
1 - 3
2 - 2,5
8
4
2 - 3
1,5 - 2
8
8
6
Advertenties
Inhoudsopgave
