Download Print deze pagina

AIRFORCE F181 TLC Montagevoorschrift En Gebruiksaanwijzing pagina 27

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 35
TLC
T1 : +
T6
T2 : On/Off motor
T1
T3 : -
T5
T3
T4: On/Off light
T2
T4
T7
Notes: this remote control is universal but not all features are available on all models.
ON FIRST USE OR IN THE EVENT OF NEEDING TO CHANGE THE REMOTE CONTROL OR THE PRODUCT'S ELECTRONIC
COMPONENTS, THE PAIRING PROCEDURE BETWEEN REMOTE CONTROL AND HOOD MUST BE PERFORMED (Valid for
all models):
1. Power off the hood for at least 10 seconds
2. Power on the hood again
3. Within the first 5 sec press the lights button T4 and release after the lights have turned on
4. Within the next 5 sec press the motor button T2 and release it when the lights turn off
Now you need to wait approximately 10 seconds, after which you may use the hood normally.
SHOULD THERE BE ANY MALFUNCTIONS DUE TO INTERFERENCES WITH OTHER REMOTE CONTROLS NEARBY, PERFORM
THE PROCEDURE TO CHANGE THE REMOTE CONTROL'S TRANSMISSION CODE (Valid for all models)
The remote control is supplied with default codes. Should you wish to generate new random codes, the following procedure
must be performed: press simultaneously the two buttons plus T1 and minus T3 for at least 10 seconds. After the remote
control's code has been changed, the pairing procedure must be performed.
Button T2 (On/Off motor): pressing the T2 button turns the motor on or off, acting on the T1(+) or T3 (-) buttons increases or
decreases the speed
1° Speed: Green LED
2° Speed: Orange LED
3° Speed: Red LED
4° Speed: flashing red LED (intensive timed for 8 minutes, after which it returns to 3 speed)
Button T4 :On/Off light
AVVERTENZE
OPERATION
27
Model :
F181 TLC
F181XXL TLC
F181XXL 1000 TLC
GB
I

Advertenties

loading

Deze handleiding is ook geschikt voor:

F181 xxl tlcF181 xxl tseF181 xxl 1000 tlc