Advertenties
Beschikbare talen
Beschikbare talen
Aircirculation Heater Palma 2.0
Summer operation:
The Thermo 1 is not required for summer operation. Just plug the Palma 2.0 heater directly into a
mains socket.
In the summer months use of the air circulation mode can achieve substantial reduction of the
greenhouse temperature. Select mode 2 on the selector switch of the Palma 2.0 heater and open the
door or the roof window on your greenhouse. The position of the thermostat switch is irrelevant here.
The greenhouse air that is heated by the sun is constantly circulated by the air circulation mode and
thus moved outside. At the same time this measure regulates the humidity in the greenhouse and
promotes the pollination of your plants.
Safety feature
Temperature controlled circuit breaker: If the device overheats the temperature-controlled circuit
breaker will switch the device off temporarily. To switch the device back on, turn the heater off for 5 to
10 minutes to cool down. Another reason for the shutdown would be blockage of the intake or outlet
opening. In this case please remove the corresponding objects.
It could also be an indication that the ventilator has failed. In this case switch the heater off,
remove the plug and contact an authorised specialist to arrange repair.
7. Cleaning, repair and disposal
•
Do not use any abrasive, caustic or cleaning materials.
•
Switch the device off before each cleaning and leave it to cool for approximately 30 minutes before
beginning cleaning.
•
Clean the casing with a damp cloth (not wet), vacuum cleaner or feather duster.
•
Never submerge the device in water.
•
Only dispose of devices at a corresponding collection centre.
•
Only authorised specialists are permitted to carry out repairs on the device. Please contact the
manufacturer or distributor in this regard.
•
Caution! The guarantee is not valid if the repairs are not carried out correctly.
•
Incorrectly executed repairs can represent a hazard for the user and other persons.
13
Advertenties
